Humanoid platformMaker: Booster RoboticsCountry: China
Booster T1
- Height
- 118 cm
- Weight
- ≈ 30 kg
- Battery life
- ≈ 2 h walking, ≈ 4 h standing
- Price · Reseller price
- EUR 32,500
- KLVSH fighters
- 0
About
The T1 is a small humanoid from Booster Robotics, launched in 2024 as a platform for researchers and developers. It is about 1.2 m tall and weighs about 30 kg, close to the Unitree G1 in size. Three configurations exist: 23 joints with simple arms, 31 with grippers and 41 with dexterous hands. It carries an NVIDIA Jetson AGX Orin and an Intel RealSense depth camera. No official list price was found on the maker's side; the figures below come from resellers and the press.
Spec sheet
| Announced | 2024[2] |
|---|---|
| Height | 118 cm[1]Also given as about 1.20 m by the same reseller. |
| Weight | ≈ 30 kg[1] |
| Degrees of freedom (body) | 23 (standard), 31 (grippers), 41 (dexterous hands)[1] |
| Peak joint torque | 130 N·m[1]maker claimMaximum knee torque. |
| Top speed | 3.5 km/h[4]not verifiedWalking speed listed by Humanoid Guide, which marks its entry as not verified. |
| Battery | 10.5 Ah[1]No voltage or Wh figure given. |
| Battery life | ≈ 2 h walking, ≈ 4 h standing[1]maker claim |
| Sensors | Intel RealSense D455 depth camera, 9-axis IMU, microphone array, speaker; LiDAR optional[2] |
| Onboard computer | Intel Core i7 (14 cores) and NVIDIA Jetson AGX Orin, 200 TOPS[2] |
| Materials | Metal and engineering plastic chassis[2] |
“Maker claim”: figure stated by the maker only. “Not verified”: single secondary source, or sources disagree. Figures no source gives are left out. Prices are those published at the date shown and may have changed.
Prices
| Version | Amount | Type |
|---|---|---|
| T1 | EUR 32,500[2]"From" price excluding VAT at Génération Robots, Booster's European distributor (April 2025). | Reseller price |
| T1 Standard | USD 41,224[3]RobotShop listing. | Reseller price |
| T1 | USD 34,000[5]"Around" figure reported by Mike Kalil. | Reported in the press |
In the ring
The T1 is one of the robots seen at Ultimate Fighting Bots in San Francisco, where human pilots drive small humanoids and every punch is thrown by the robot. Reports describe T1s fighting Unitree G1s there; the platform behind the league was built with Booster Robotics and FrodoBots. Its European distributor says the chassis is designed to take falls and moderate impacts and that it gets up quickly from the ground. The winner of one of these nights admitted that the robots still look like toddlers when they fight.
KLVSH fighters on this platform
No KLVSH fighter profile uses this platform yet.
Seen in
Sources
- Génération Robots, Booster T1 product page
- Génération Robots blog, 3 Apr 2025
- RobotShop, Booster T1 (Standard)
- Humanoid Guide, Booster T1 (not verified)
- Mike Kalil, SF robot fight club
- The San Francisco Standard, 10 Aug 2025
Figures checked on 19 October 2026.
KLVSH is independent and not affiliated with Booster Robotics. Names are used to identify the products. Figures from the sources listed; maker claims are marked.